Free standing, Cast Iron Roll Top Dublin Slipper Bath

In stock second week of March
 

• Measures 1560mm x 780mm x 440mm measured without claw feet.
• With claw feet at the high end 740mm, at the lower end 550mm.
• Drain pipe diameter 50mm.
• Tap holes already drilled at the lower end of the bath.
• Supplied with polished adjustable chrome feet at no extra cost, as shown in the picture.
• The outside of the bath and ball & claw feet can be spray painted to match the theme of your bathroom.
• Taps are not included, mixer taps and exposed waste can be purchased from the tap section and waste section
• Certification ISO 9001:2000. 

All our cast iron baths are made by traditional and mordern methods.

Quality control and manufacturing information from our factory: 

Throughout this process, strict quality controls are enforced, and inspections made at each stage to ensure a high quality casting.

Since it is mainly a manual process, some variations are inevitable and acceptable within given tolerances. Once the casting has passed its final inspection, it is ready to be transported to the bath enameling plant. Once dry, a bath is placed in a furnace and heated to about 950°C. It is allowed to soak at this temperature for a short while before being removed from the furnace and sprinkled with dry enamel frit whilst still hot.

The bath is then returned to the furnace and brought back up to temperature. This process is repeated until the bath has had four or five coats of enamel. It is then removed from the furnace and allowed to cool manually.

Once cool, the bath enamel is inspected before being sent to the finishing department to have its double glaze added to the surface.

Then feet are fitted and appropriate surface treatment to the exterior. This is the only manufacturer adopting AA grade titanium glaze produced by an America company and a top glaze produced by a German company