Cast iron free standing bath

• Manufactured from cast iron and enamel, (enamel 1.5-2.0mm interior thickness).
• Measures 1700mm x 770mm x 450mm measured without claw feet. With claw feet 600mm.
• Certification ISO9001:2000.
• Drain pipe diameter 50mm.
• Tapholes already drilled on the middle of the bath.
• Supplied with polished adjustable chrome feet at no extra cost as shown in the picture, choice of chrome or white.
• The outside of the bath and ball & claw feet can be spray painted to match the theme of your bathroom.
• Taps and overflow are not included.
• Get a discount! add your taps   waste  and stand pipes to your order on the right hand side of the picture.

Certification ISO 9001:2000.

All our cast iron baths are made by traditional and mordern methods, quality control from the factory:

Throughout this process, strict quality controls are enforced, and inspections made at each stage to ensure a high quality casting. Since it is mainly a manual process, some variations are inevitable and acceptable within given tolerances. Once the casting has passed its final inspection, it is ready to be transported to the bath enameling plant. Once dry, a bath is placed in a furnace and heated to about 950°C. It is allowed to soak at this temperature for a short while before being removed from the furnace and sprinkled with dry enamel frit whilst still hot. The bath is then returned to the furnace and brought back up to temperature. This process is repeated until the bath has had four or five coats of enamel. It is then removed from the furnace and allowed to cool manually. Once cool, the bath enamel is inspected before being sent to the finishing department to have its double glaze added to the surface. Then feet are fitted and appropriate surface treatment to the exterior.

This is the only manufacturer adopting AA grade titanium glaze produced by an America company and a top glaze produced by a German company.